Programming keys of another RC

Modified on Wed, 20 Nov at 11:42 AM

1. Press the SET button on the R_volution remote control for 5 seconds.
2. The LED on the R_volution remote control turns RED.
3. Press the key you want to be programmed on the R_volution remote control.
4. The LED on the R_volution remote blinks RED.
5. Place your remote control in front of the R_volution remote control then press the key you want to learn on your remote control.
6. The LED on the R_volution remote blinks rapidly and then freezes. Learning process has succeeded.
7. Repeat steps 3 through 6 if you want to learn other keys.
8. To finish and save, press the SET button on the R_volution remote control. LED will turn off.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article