Power On with external IR blaster device

In deep standby mode, Bluetooth wake-up is unavailable, and IP-based commands are non-functional. However, a reliable alternative is to use an external IR blaster device to simulate the original remote's power signal.

? Recommended Solution: Network-Controlled IR Blaster

Devices such as the RTI XP-Series, Global Caché iTach IR, or more affordable options like BroadLink RM4 Pro can transmit IR codes over the network. These are particularly effective because:

• They can learn the R_volution Player’s IR “Power On” command via the original remote.

• They can be triggered remotely using HTTP, MQTT, or integration with automation systems.

• They work even when the PlayerMini’s API is unavailable, as long as the IR receiver is powered in standby.

? How It Works:

1. Program the IR blaster with the Power On IR code from the original remote.

2. Position the blaster in line-of-sight of the R_volution Player’s IR sensor.

3. Trigger it remotely — for example, via a mobile app, HTTP call, or automation scenario.

This method is already used successfully in custom installations where IP wake-up is not possible.